This is a small in-line DC dimming controller for you classic 150w or 100w low-voltage dedolights. The unit has a 2-position switch on the back to select between 12v or 24v lamp use. The dimmer regulates 12-15v DC to 11.8v for 12v lamps, and 24-32v DC to 23.5v for 24v lamps. It includes a built-in 28" XLR3 male head cable and a mini-jack Ø5.5 mm/2.5 mm chassis connector. With 12v lamps: DLDIM-BAT requires a 12-15v 120w DC battery or AC power supply for all Classics (DLH1/2 or DLH4). With 24v lamps: DLDIM-BAT requires a 24v DC (150W) battery or AC power supply for DLH4.
REQUIREMENTS:
-
With 12v Lamps - DLDIM-BAT requires a 12-15v 120w DC battery or AC power supply for all Classics (DLH1/2 or DLH4).
-
With 24v Lamps - DLDIM-BAT requires a 150w DC battery or AC power supply for all the DLH4.
- 12v models - DLH1, DLH2, DLH3, or 24v models DLH4 classic dedolights
- DLH1x150S classic soft light by dedolight
[TABS]
FEATURES
The
DLDIM-BAT
| Dimming |
Continuous - 0 - 100% |
| Max Power |
150w |
| Power Supply |
DC input requires source with mini-jack connector
|
| Input Voltage |
12-15v DC to 11.8v and 24-32v DC to 23.5v
|
| Size |
4" x 1.5" x 1.5“
|
| Weight |
8 oz
|
| Cables |
28" Head cable integrated (male XLR3) - REQUIRES a cable for your DC source to the mini-jack input |
ADD-ONS
SUGGESTIONS:
-
0CAPS12-120 - AC power supply for 12v lamps - 12v DC out, 120w (10Amp) with Ø5.5 mm/2.5 mm jack, and US AC cord. 100-240VAC
-
0CAPS24-150 - AC power supply for 24v lamps - 24v DC out, 150w (6.25Amp) with Ø5.5 mm/2.5 mm locking jack, and US AC cord. 100-240VAC
-
0CA-XLR3M/F - 10' XLR3 head extension cable (or custom lengths)
-
0CA-XLR3M/J - Mini-jack to XLR3 cable, 48"
-
0CA-XLR4M/J - Mini-jack to XLR4 cable, 48"
-
DDCC-XLR - coiled mini-jack to XLR4 adapter cable
-
DDCC-DTAPS - 1' adapter cable with Ø5.5 mm/2.5 mm jack to D-TAP connector allowing you the power DLDIM-BAT using a D-tap source
