This is a recommended starter kit of 7x10cm (2.75" x 4") Lightstream Reflectors. The essentials are here, including two DLR-LOCK sliding lock mounts to get two boards mounted at one time. The DLPR10 pouch keeps boards safe from dings while not in use.
REQUIREMENTS:
- Must use one DLR-LOCK or one DLR-LOCK-M to mount one reflector
KIT INCLUDES:
- #1 Lightstream reflector (DLR1-7x10)
- #2 Lightstream reflector (DLR2-7x10)
- #3 Lightstream reflector (DLR3-7x10)
- #4 Lightstream reflector (DLR4-7x10)
- 2x DLR-LOCK brackets, required for mounting boards (5/8" receivers)
- 1x DLRP10 - Protective pouch for 4 reflectors
KIT WEIGHT - 1.25 LBS
[TABS]
LIGHTSTREAM
Lightstream reflectors, when used with dedolight focusing lights an"Parallel Beam Intensifier" lenses, offer a systematic approach to reflecting and redefining light. From a single source, it's possible to create multiple light sources without adding to your power footprint. The light qualities are brilliant, offering hard and soft looks depending on the type reflector, and beam used as its host. The system is brought to life by using a light source with a strait, clean, parallel beam which "DPBA" lenses on dedolights produce. They warp the flood setting of the light back into a powerful strait spot, somewhere between 4° and 8°, depending on the light and lens used. These lenses can get you up to 550% MORE light output than the light can produce natively (DLED3-D with DPBA-610 Intensifier). With that new beam, you can use a #1 reflector to redirect it without major changes (think front-facing mirror, but with better results). Use a #2 Lightstream reflector to spread that host beam to a 12° spot. A #3 Lightstream reflector will shine a 50° flood, and the #4 Lightstream reflector offer a 90°, spread not unlike a standard bounce board. The creative, professional, economic and environmental possibilities are too large to list. "Lightstreaming" with Lightstream reflectors and Parallel Beam Intensifiers is simply a game changer.
ACCESSORIES
SUGGESTIONS
- A dedolight focusing light source with DPBA Intensifier lens
- DLR-LOCK-M sliding mount with 5/8" baby pin (all-aluminum)
- GFCA58DBLJNT or DLGA240 ball-joint arms
- G-Force reflector array kit to make a 4-reflector grid (7x10cm size kit)
See all Lightstream accessories in the Lightstream section of the main menu.
[/TABS]