SWIT Tri-Power DC Kit with TD-R210S 16/24/48V Light Stand Power Adapter and 2x PB-H290S V-lock Batteries
SWCA-PACK: Full Tri-power pack outputs 16v or 24v or 48v DC with 2x 16v V-mount batteries and charger. Includes: 2x SW-290W 14/16/28v V-LOCK batteries 1x SW-24/48COMBO to outputs 16/24/48v DC 1x SW-2CH Dual Fast charger for V-LOCK batteries. For Gold Mount version, please choose the option switch above.
SW-24/48Combo: 24/48v DC Combo accepts 2x V-mount batteries. When used with 2x 290W 16v batteries (SW-290W) combines the voltage to output 24v (240W on XLR4 female) or 48v DC (500W on XLR3 female), selectable via a 2-position switch. Features D-Tap DC out connector. Quick instal around a stand (0.9" to 1.78" diameter) via snap & slide system, or sits on the floor. Machined aluminum chassis and safety cable.
The PB-H290S V-mount Battery
14.4V/28.8V Bi-voltage auto switch
For ALEXA LF/65 high voltage cameras
For all normal voltage cameras
For high voltage cine lights
Compatible with normal voltage chargers
290Wh capacity, Max 200W high load
6A fast charging support
8-LED remaining time indicators
D-tap power output socket
Normal V-LOCK connection (for Gold Mount, select above)
1.5m drop-off proof, IP54 water proof
Multiple circuit protections
The TD-R210S Light Stand Power Adapter
2 V-mount battery capacity
4pin Regulated 24V out, Max 240w
3pin Regulated 48V out, Max 500w
500W by SWIT Bi-voltage batteries
Neutrik XLR connectors
Fits on 25-45mm light stands
For ALEXA LF/65 and all normal cameras The ARRI Alexa LF / 65 require on-board battery input voltage 19.5-34V only, and the normal 14.4V (11-16.8V) batteries are no longer compatible. The existing 26-28.8V high voltage batteries can power Alexa LF/65, but the high voltage with the same physical connectors will surely damage other normal cameras. A better solution is to use normal 14.4V battery with a DC boost plate, but the current between battery and V-plate will get quite high with 160W load and 14.4V voltage, and will melt the battery pins. This a great solution for Alexa LF/65: the SWIT Intelligent Bi-voltage Battery, can output both 11-16.8V normal voltage and 22-33.6V high voltage, with auto recognition and switching by the dedicated V-mount plate, compatible with Alexa LF/65 and all other normal cameras and devices, with no risk of misusing. 14.4V/28.8V Auto Switching (By Alexa dedicated plate KA-A20S) The Bi-voltage battery PB-H290S output normal 11-16.8V voltage as default, you can attach to any normal V-LOCK cameras or other devices, and any normal voltage chargers. Use the ARRI ALEXA dedicated V-LOCK plate KA-A20S, PB-H290S battery can recognize and auto switch on 22-33.6V, to power Alexa LF/65/SXT/AMIRA.
* KA-A20S Plate: CNC metal housing, High load power pins, Provides D-tapx2 (16V), 2-pin LEMO (16V), USBx1 (5V/2A) 14.4V/28.8V Auto Switching (By “Magic Sticker” on normal V-plates) Beside ALEXA cameras, many Cine Lights are also designed high voltage input, to reduce current effectively, and protect power pins and ensure the reliability. You can easily put on a “Magic Sticker” on the particular position of all standard V-mount plates, then PB-H290S battery can recognize and auto switch on 22-33.6V output mode. 290Wh Capacity PB-H290S consists of 24pcs high class 18650 battery cells, and reaches 290Wh high capacity, supports Max 200W constant power output, and can drive ALEXA LF (160W) more on-camera monitors or wireless simultaneously. The high load battery will have longer life time than normal battery if always under full load power. 6A Fast Charging Using SWIT S-3812S fast charger PB-H290S supports 6A fast charging by SWIT S-3812S fast charger to save more than 50% charging time; it can be charged from 0 to 80% after 2 and half hours, and fully charged within 4 hours 15 minutes. D-tap Socket A D-tap DC output socket is equipped on the top side of the battery pack, to power the other on-camera equipment together.
Using 14.4V (11-16.8V) output mode, D-tap output 11-16.8V and Max load 120W/10A
Using 28.8V (22-33.6V) output mode, D-tap output constant 16V and Max load 50W/3A
Digital Power Indicator When battery is discharging: Press “Power Check” button, Upper 4 LEDs display remaining working hours, and Lower 4 LEDs display remaining working minutes, under current output power. The LED will flash when remaining time is less than 15 minutes to remind changing battery. When battery is charging: Upper 4 LEDs flashing constantly, indicates the real-time capacity percentage 25%, 50%, 75% and 100%. When battery is free: Press “Power Check” button, Upper 4 LEDs light up, to indicate the remaining capacity percentage 25%, 50%, 75% and 100%. Strong 1.5m Drop-off Proof The PB-H290S has an innovative dual housing structure: the inner cell cage and outer anti-shock housing with rubber covers. The new structure makes the battery quite strong and anti-shock. The battery can survive from 1.5 meters any angles drop-off.
The TD-R210S is a solution to drive high-power lights with only 2x V-mount batteries with optional 24V or 48V regulated outputs. It's high-load, portable and easily mounts on most industry Light and C-stands.
Output Description Max 48V 500W Load Installed with 2x V-mount batteries, the TD-R210S can output 4pin XLR regulated 24V or 3pin XLR regulated 48V DC power. With normal 14.4V batteries, the Max load is 240W. Using SWIT 14.4V/28.8V Bi-voltage batteries, the Max load under 48V can reach 500W, to support high power lights like ARRI Skypanel S60-C / S120-C 100% light output.
3-pin XLR (Neutrik)
4-pin XLR (Neutrik)
3-pin XLR (Neutrik)
4-pin XLR (Neutrik)
The Max Load should be no more than 2 batteries
Recommend to use same model, same capacity batteries to power
SkyPanel Power Solution
For S60-C / S120-C 100% light output
SkyPanel S60-C / S120-C consume 430W power, and can output 100% light only input 48V DC. Use 2x SWIT high load bi-voltage PB-H260S with the TD-R210S adaptor, will output 48V 500W for Skypanel S60-C / S120-C.
Compact & Balanced The TD-R210S is extremely compact, without fans, and fits on 25mm-45mm diameter lights stands. It’s perfectly balanced with 2 batteries and uses an easy and reliable mount to grip the stand.
Neutrik XLR Socket
To ensure stable high current output, the TD-R210S adaptor uses reliable and safe Neutrik 3-pin and 4-pin XLR sockets.