200w Single Light Set - DLH200DT Focusing HMI Light with Anton Bauer DC Ballast - (0CA200HOLLYAB-W)
WEB STORE LAUNCH PROMO
This version of the DLH200DT light set comes with an Anton Bauer gold mount plate on the control ballast (the DEB200DT-BATAB). The DLH200DT "Sundance" is the same size as the popular Classic DLH4, 150w halogen dedolight. With that you have an incredible pop of clean daylight with the same "clean beam" technology you might be used to seeing if you have used the popular Classic 150. But with this light, the 200w HMI output increase is notable. It's worth mentioning that this light can be run with a tungsten ceramic HMI lamp as well which has four times the output of traditional tungsten lamps. Using either lamp, the light can be switched at the flicker-free DEB200DT electronic control ballast from 200w to 100w (or 125w using tungsten) for dimming. All of the attachments you have for your Classic fit this light head as well as the DLED7 and DLED4 (see "M Size" accessories).
NOTE: See optional hard case options above. With this option Dedolight California customizes the case to fit the light set. By default the case is not a part of the set.
DLH200DT - 200w, HMI focusing light head
DEB200D-BATAB - DC ballast with two integrated Anton Bauer gold mount plates and XLR3 input (21.5 - 33V DC)
DPOW200D - Head cable
DBD8 - Barn door
DPLS - Light shield ring
DL200DHR-NB - HMI lamp
Lamp # DL200DHR-NB for daylight, Lamp # DL200THR-NB for Tungsten ceramic
48°- 4.5° (1:14) - (With optional DLWAR optical aspheric wide-angle attachment, take the wide angle from 48°-85°)
Active silent cooling
Dual 5/8" (16mm) vertical or horizontal receptacles
3" (76mm) diameter
IP23 - rainproof housing
2.8 lbs (1300g)
Double UV Lens protection - lowest UV of any comparable light source!
This is the DEB200DT-BATAB electronic ballast needed for DC operation of the DLH200DT, 200w HMI focusing light. Dimming HMI is always the issue, but this ballast allows users to dim up to 50% from 200w to 100w at its lowest setting. This version of the DEB200 ballast has two integrated gold mount battery plates for DC use. The ballast is light weight yet rugged, small yet powerful, with some solid features you would want for HMI control:
Dimmable between 200w and 100w settings
Over voltage, overload, overheat and short circuit protection
Two Anton Bauer integrated gold mount battery plates with XLR3 input (21.5 - 33V DC)
9.4" x 5" x 3.6"
Weight - 4.8 lbs
DP1.1 - Imager projector with 60mm lens
DP2.1 - Dedicated shutter projector with 60mm lens
DPBA-710 - Parallel Beam Intensifier (up to 163% increase in spot)
DPBA-714 - Parallel Beam Intensifier (up to 264% increase in spot)
DEB200H - Ballast-to-stand holder
DPOW200D - Extension cable (23' head cable)
Search for all M Size accessories to build-out your DLH200DT!
Sign up for our Promo List!
Sign up for our mailing list to receive new product alerts, special offers, and workshop schedules.