This is a small in-line DC dimming controller for your Classic 150w or 100w low-voltage dedolights. The unit has a 2-position switch on the back to select between 12v or 24v lamp use. The dimmer regulates 12-15v DC to 11.8v for 12v lamps, and 24-32v DC to 23.5v for 24v lamps. It includes a built-in 28" XLR3 male head cable and a mini-jack Ø5.5 mm/2.5 mm chassis connector.  Requires a power supply with a mini-jack output connector or an adapter cable from XLR3 or 4 male to mini-jack (see cables options in ADD-ONS).

With 12v lamps: DLDIM-BAT requires a 12-15v 120w DC battery or AC power supply for all Classics (DLH1/2 or DLH4). With 24v lamps: DLDIM-BAT requires a 24v DC (150W) battery or AC power supply for DLH4.

REQUIREMENTS:

• With 12v Lamps - DLDIM-BAT requires a 12-15v 120w DC battery or AC power supply for all Classics (DLH1/2 or DLH4). ProCali recommended power supply: 0CAPS12-120J.
• With 24v Lamps - DLDIM-BAT requires a 24v 150w DC battery or AC power supply for all the DLH4. ProCali recommended power supply: 0CAPS24-150J
• 12v models - DLH1, DLH2, DLH3, or 24v models DLH4 classic dedolights
• DLH1x150S classic soft light by dedolight

[TABS]

FEATURES

ADD-ONS

SUGGESTIONS:

• 0CAPS12-120J - AC power supply for 12v lamps - 12v DC out, 120w (10Amp) with Ø5.5 mm/2.5 mm jack, and US AC cord. 100-240VAC
• 0CAPS24-150J - AC power supply for 24v lamps - 24v DC out, 150w  (6.25Amp) with Ø5.5 mm/2.5 mm locking jack, and US AC cord. 100-240VAC
• 0CA-XLR3M/F - 10' XLR3 head extension cable (or custom lengths)
• 0CA-XLR3M/J - Mini-jack to XLR3 male cable, 48"
• 0CA-XLR4M/J - Mini-jack to XLR4 male cable, 48"
• DDCC-XLR - coiled mini-jack to XLR4 adapter cable
• DDCC-DTAPS - 1' adapter cable with Ø5.5 mm/2.5 mm jack to D-TAP connector allowing you the power DLDIM-BAT using a D-tap source

[/TABS]